Pneumatic Accessories
FRL units, directional valves, cylinders, push-fit fittings, polyurethane tubing, pressure gauges and reinforced hoses — specified and supplied by ITT for reliable machine-side compressed-air control.
Explore applications →
View product range →
Control air
where it matters.
Compressed air reaches your machines through piping — but performance depends on what happens at the point of use. ITT supplies pneumatic accessories matched to your pressure, flow, duty cycle and environment: filter-regulator-lubricator sets for clean regulated air, solenoid and manual valves for logic control, ISO cylinders for clamping and actuation, and modular fittings with flexible tubing for fast, leak-resistant connections. We help standardise accessory selection across lines to cut downtime and spare-part complexity.
Application-led accessory selection
Four common machine-side pneumatic needs. Select an application to see recommended accessory types and design considerations.
Filter · Regulator · Lubricator
FRL assemblies prepare compressed air before it enters valves and cylinders. Filtration removes particulate and condensate; regulators stabilise pressure to the set point; lubricators add controlled oil mist for pneumatic tools and high-cycle cylinders where needed.
- 5–40 µm filtration grades for general and precision air
- Manual and semi-auto drain options for condensate removal
- Modular stacking — filter + regulator + lubricator in one bank
- Locking regulators to prevent accidental pressure change
- Port sizes from G¼ to G1 for machine drops and manifolds
Directional valves & actuators
Solenoid, pilot and manual directional valves route air to cylinders and grippers. ITT matches valve flow (Cv), coil voltage and spool configuration to your automation logic — from single-acting clamp circuits to double-acting packaging actuators.
- 2/2, 3/2, 5/2 and 5/3 spool configurations
- ISO 6431 / 6432 cylinders — bore 32 mm to 200 mm
- Magnetic piston switches for position feedback
- 24 V DC / 110 V AC / 220 V AC coil options
- Manifold mounting for multi-station machines
Push-fit fittings & tubing
Quick-connect fittings and flexible polyurethane tubing connect valves to cylinders and tools without threading. ITT specifies tube OD, material and fitting series for your pressure, temperature and bending radius — including nickel-plated brass and stainless options for harsh areas.
- Push-in, push-on and compression fitting types
- PU, nylon and PE tubing — 4 mm to 16 mm OD
- Elbows, tees, reducers, bulkheads and manifolds
- Release-ring fittings for fast maintenance
- Colour-coded tubing for supply vs exhaust circuits
Pressure gauges & flexible hoses
Gauges confirm set pressure at FRL banks and machine drops. Reinforced PVC and rubber hoses bridge short gaps where rigid tubing is impractical — for hand tools, blow guns and mobile connections.
- Bourdon and digital gauges — 0–10 / 0–16 bar ranges
- Glycerine-filled dials for vibration damping
- Reinforced PVC hose for general workshop use
- Anti-spark and oil-resistant hose options
- Quick-couplers for tool changeover
Why specify accessories with ITT
Correct accessory selection protects downstream equipment, reduces leaks and keeps changeover times predictable across your plant.
Matched to system pressure
FRL, valve and cylinder ratings aligned with your compressor output and ring-main pressure — no undersized components causing drop or failure.
Standardised spares
Consistent fitting series and valve types across lines means fewer unique spare parts and faster maintenance turnaround.
Cleaner point-of-use air
Proper filtration and drainage upstream of valves and cylinders extends seal life and reduces unplanned stoppages.
Fast installation
Push-fit connections and pre-assembled FRL banks cut wiring and piping time on new machines and retrofits.
Automation ready
Solenoid valves, manifolds and position switches integrate with PLC and packaging-line control schemes.
Local support
ITT Faridabad team assists with sizing, substitution and emergency spares across Delhi NCR industrial areas.
Accessory categories
Core pneumatic components supplied as matched sets or individual items — integrated with your FS-Curtis compressed-air system by ITT.
FRL Units & Filters
Modular filter-regulator-lubricator assemblies and standalone filters for general, coalescing and precision air preparation.
- Wall and inline mounting configurations
- Pressure gauges and locking adjusters
- Micro-fog and oil-mist lubrication options
Valves & Cylinders
Solenoid and manual directional control valves plus ISO standard air cylinders for clamping, lifting, indexing and ejection.
- Single and double-acting cylinder options
- Magnetic piston for reed-switch feedback
- Manifold and sub-base mounting
Fittings & Tubing
Push-in fittings, connectors, manifolds and polyurethane / nylon tubing for machine-side distribution.
- Straight, elbow, tee and Y connectors
- Bulkhead and flow-control fittings
- Colour-coded tubing for circuit identification
Gauges & Hoses
Pressure indication, reinforced flexible hose and quick-couplers for tools, blow guns and maintenance connections.
- Panel and inline gauge mounting
- Oil-resistant and anti-spark hose grades
- ITT stocks common sizes for fast replacement
ITT engineering & supply support
As an FS-Curtis compressed-air distributor, ITT connects generation, treatment, piping and machine-side accessories into one practical system — with local sizing support and spares availability in Faridabad.
Application sizing
Flow, pressure and bore selection matched to your machine duty and control scheme.
Standardisation
Consistent accessory families across production lines to simplify maintenance.
After-sales spares
Filters, seals, coils and fittings stocked for common industrial pneumatic ranges.
Frequently asked questions
Specify your pneumatic accessories
Share your machine list, pressure requirements and automation scheme — ITT will recommend matched FRL, valve, cylinder and fitting packages.